Product Code : SC-AF01
The type is broken up by BAMARC machine. The tools made of brown fused alumina are suitable for grinding carbon steel , normal alloy steel, malleable cast iron and hard bronze. It is one kind can be used for all kinds of bonded abrasive products.
|
|
Chemical Composition(%) |
Magnetic material |
Al2O3 |
TiO2 |
Fe2O3 |
CaO |
SiO2 |
F12-F120 |
95.00min |
1.50-3.80 |
0.25max |
0.40max |
1.50max |
0.01max |
F150-F220 |
93.00min |
1.50-3.80 |
0.25max |
0.40max |
1.50max |
0.01max |
Size Distributio :
According to FEPA-Standard42-1984R1993
Grit Size Available(F):F8-F220-F2500. |
Bulk Density Index (g/cm3) |
Grit No. |
F12 |
F16 |
F20 |
F24 |
F30 |
F36 |
F46 |
B.D. |
1.92-2.06 |
1.90-2.04 |
1.88-2.02 |
1.83-1.97 |
1.81-1.95 |
1.79-1.93 |
1.75-1.89 |
Grit No. |
F60 |
F80 |
F100 |
F120 |
F150 |
F180 |
F220 |
B.D. |
1.71-1.85 |
1.67-1.81 |
1.61-1.75 |
1.59-1.73 |
1.56-1.70 |
1.54-1.68 |
1.52-1.66 |
Customer's special B.D requirements are also available. |
Product Code : SC-AF02
It is one kind of specially Brown Fused Alumina grain for abrasives application. Brown fused alumina is fused in a special ace furnnace,named tilting furnace.The Lump made from this kind of furnace have the very small crystal than Fixed Furnace, so the products have the higher toughness and better anti-impact ability, It is well used in vitrified application and can improve the grinding efficiency.
|
Typical Specification(Grit F30) |
Chemical Composition |
BulkDensity |
Magnetic Material |
Toughness |
Al2O3 |
Fe2O3 |
TiO2 |
SiO2 |
1.88g/cm3 |
0.0072% |
73.26 |
95.68% |
0.08% |
2.76% |
1.12% |
Product Code : SC-AF03
The grains of this type of Brown Fused Alumina are re-heated at 800℃-1,200℃ and the purpose is to renovate the crack on the surface and interior of crystal and then to improve the toughness and anti-impact ability of grain. After re-treated, the product can increase the using time of the bonded abrasives products. The appearance of the grain is low blue colour.
|
Typical Specification(Grit F30) |
Chemical Composition |
BulkDensity |
Magnetic Material |
Toughness |
Al2O3 |
Fe2O3 |
TiO2 |
SiO2 |
1.92g/cm3 |
0.0072% |
80.26 |
95.68% |
0.08% |
2.70% |
1.10% |
Product Code : SC-AF04
The grains of this type are crashed by ball mill machine, its grain shape is equaled volume with needle form, the bulk density is middle, less than TYPE: SC-AF01 but higher than TYPE: SC-AF05.
This kind of abrasive grain normally can match the various vitrified and resin applications.
|
Typical Specification(Grit F30) |
Chemical Composition |
BulkDensity |
Magnetic Material |
Toughness |
Al2O3 |
Fe2O3 |
TiO2 |
SiO2 |
1.81g/cm3 |
0.0072% |
67.15 |
95.63% |
0.14% |
2.23% |
1.42% |
Product Code : SC-A05
The grains of this type are broken up by rolling mill , with the sharp-edged grain shape.
this kind of brown aluminum grain presents the excellent working efficiency on glass carving purposes. It is also a kind of material for resin bond abrasive tools.
|
Typical Specification(Grit F30) |
Chemical Composition |
BulkDensity |
Magnetic Material |
Al2O3 |
Fe2O3 |
TiO2 |
SiO2 |
1.75g/cm3 |
0.0072% |
95.52% |
0.16% |
2.20% |
1.50% |
Bulk Density Index(g/cm3) |
Grit No. |
F-12 |
F-16 |
F-20 |
F24 |
F30 |
F36 |
F46 |
B.D. |
1.80-1.94 |
1.78-1.92 |
1.76-1.90 |
1.71-1.85 |
1.69-1.83 |
1.67-1.81 |
1.63-1.77 |
Grit No. |
F60 |
F80 |
F100 |
F120 |
F150 |
F180 |
F220 |
B.D. |
1.59-1.73 |
1.55-1.69 |
1.49-1.63 |
1.47-1.61 |
1.44-1.58 |
1.42-1.56 |
1.40-1.54 |
Customer's special B.D requirements are also available.
|
Product Code : SC-A06
This kind of brown aluminum oxide is used for coated abrasive products. The grain
Shape is very sharp, the strip and needle shape are well kicked off from the grains. it can be used for producing all kinds of coated products, such as sand paper ,cloth, rolls, belts, etc.
it also can be re-heated at 800℃-1,200℃ and the purpose is to renovate the crack on the surface and interior of crystal and then to improve the toughness and anti-impact ability of grain.
|
Typical Specification(Grit F36) |
Chemical Composition |
Bulk Density |
Magnetic |
Hydrophile |
Toughness |
Al2O3 |
Fe2O3 |
TiO2 |
SiO2 |
1.79g/cm3 |
0.0058% |
86mm |
67.15 |
95.49% |
0.14% |
2.15% |
1.45% |
Grit Size Available : P16-P220-P2500.
|
Bulk Density Index(g/cm3) |
Grit No. |
F-12 |
F-16 |
F-20 |
F24 |
F30 |
F36 |
F46 |
B.D. |
1.90-1.98 |
1.86-1.94 |
1.83-1.91 |
1.80-1.88 |
1.77-1.85 |
1.75-1.83 |
1.71-1.79 |
Grit No. |
F60 |
F80 |
F100 |
F120 |
F150 |
F180 |
F220 |
B.D. |
1.68-1.76 |
1.61-1.69 |
1.59-1.64 |
1.55-1.63 |
1.53-1.61 |
1.52-1.60 |
1.49-1.57 |
|